Specifications:

Dimensions

• Height: 53 1/4" (135.3 cm)
• Width: 36" (91.4 cm)
• Depth: 27" (68.6 cm)
• Weight: 375 lbs (170 kg)

Power Supply

• 220 / 240 or 117 Volts

Oxygen Monitoring

• Range: 10 - 100 vol%
• Resolution: 1 vol%
• Accuracy: ± 3 vol%

Airway Pressure Monitoring

• Range: -10 - 100 cm H2O
• Resolution: 1 vol%
• Accuracy: ± 3 cm H2O or ± 10% of reading, whichever is higher.

Tidal Volume Monitoring

• Range: 0.2 - 50 I
• Resolution: 0.1 I
• Accuracy: 0.1% or 0.1 I whichever is higher.

Ventilator

• Frequency: 1-99
• I:E Ratio: 4:1 - 1:4.5
• Inspiratory:
• Flow: 10 - 100 I/min
• Tidal Vol: 50-1500 ml

More Features

• Four display options with integrated monitor controls: 15” or 17” high-resolution color video display and 10.4” or 15” flat panel color LCD display.
• Or large 17” color CRT display.
• User configurable display layout and colors.
• Support for up to 8 waveforms on screen.
• Support for user configurable second and third screen with a different waveform and numerical information.
• Anesthesia dedicated alarm system.
• Alarms display and adjustment page.
• 10-minute mini graphical trends referenced to set alarm limits.
• Automatic alarm limits function.
• Six user-configurable modes and a special cardiac bypass mode.
• 24-hour numerical and graphical trends.
• Split screen capability to show ST, spirometry loop, EEG, EP, or mini trends permanently.
• Four user-configurable graphical trend pages.
• Trend cursor in both graphical and numerical trends.
• Waveform snapshots to store and recall waveform samples.
• Help function.
• On-line help for menu functions.
• Open software and hardware architecture.
• Easy insertion/removal of plug-in parameter modules without interrupting other monitoring.
• Anesthesia care oriented user interface.
• Optional extended arrhythmia analysis.
• Connector for Datex-Ohmeda S/5™ Device Interfacing Solution.
• Anesthesia-specific command bar for intuitive access to the monitoring functions.
• Removable command bar brings monitor controls close to the user.
• Frame with additional module slots.
• Moves patient cables close to the patient.
• Single cable connects the Extension Frame to the s/5 anesthesia Monitor’s Central Unit.
• Reduces patient cable clutter.
• Mounts to any vertical or horizontal pole.

Display

• Display Size: 21.1 in diagonal.
• Display type: Active matrix color TFT LCD.
• Display resolution: SVGA resolution, 800 x 600.
• Number of traces: up to 8.
• Display layout and colors: User-configurable. Integrated Command Board with direct function keys, menu keys, and ComWheel for selections and adjustments in menus.

Frame

• Module capacity: 2+2 module slots.
• I/O connections: RS-232 computer serial output. 2 analog outputs. External keyboard connector.
• Network option: Compatible with Datex-Ohmeda Network for monitor-to-monitor communication and centralized viewing.
• Network and MemCard option: Activates MemCards to transfer the trended data of patient vital signs.
• Printing: Laser printing capabilities with serial printer supporting PCL5 language (Network and serial/parallel converter).
• Recorder option: Built-in three-channel thermal array recorder.
• Mounting options: Bed mount, wall mount, and roll stand.

Power Supply

• Rated voltage range and frequencies: 100 to 240v ±10%, 50/60 Hz.
• Maximum power consumption: 140 VA.
• Protection class: Class I.
• Grounding: Hospital grade.

Battery

• Type: Built-in NiMH battery. (2 pcs.)
• Capacity: Up to 1.5 h typical on full charge at 23°C.
• Recharging: When connected to mains power.
• Charging time: 10 hours to full capacity.
• Battery operation alarm.
• Indicator: Battery bar displayed on the screen.

Trends

• Graphical: All parameters, selectable times from 30 min to 72 h.
• Numerical: Continuously measured parameters sampled every 5 minutes, NIBP and PCWP values updated after each measurement. Also, the marker triggers numerical trend updating.
• Trend cursor: In both graphical and numerical trends.

Alarms

• Alarm system classified into three categories according to priority in critical care; color and audio tone coded. Central alarms display and adjustment page. 10 min graphical mini trends referenced to set alarm limits.