Control Pc Board (refurbished)

Replacement OEM Part #002-1992-00

• Includes: Mounting Bracket

  Please Note: When shipping RPI your non-operational red colored PC Board, you must include the Mounting Bracket in order to receive full credit! See "How it works" notes below.

• PC board performance verified and tested (Quality Control test printout included with each board)
• 90 Day Warranty
• See "Warning" note below
• "Warning"
• "PC Board Exchange Program with $100 (or $75) Core Credit - How it Works", see Notes: below for details. Please Note: If returning a non-operational PC Board without the mounting bracket, then a total credit of only $75 will be issued.
• See Notes: below for Serial Numbers this part fits

Notes:

Part only fits:

• M9-020 and -022 Serial Number V1697650 thru Present. 115 Volts Only and Non "D" sterilizers
• M11-020 and -022 Serial Number V1697650 thru Present. 115 Volts Only and Non "D" sterilizers

Warning:

• To avoid damaging the replacement PC Board and possibly voiding the Warranty, check the condition of the Heater prior to installing your replacement PC Board, please read Control PC Boards and Troubleshooting Guide to Protect Your Replacement PC Board, page 2.
• DO NOT use this PC Board in 220V or D Sterilizers.

PC Board Exchange Program with $100 Core Credit - How it works:

• When you place an order for a PC Board, RPI will place a "hold" on the order and send you a box with a UPS pre-paid return label addressed to RPI. Use this box to ship your non-operational PC Board and the mounting bracket to RPI. Once your non-operational PC Board has been received by RPI and found to be in reasonable condition without burn holes, we will complete your order and ship you a refurbished PC Board. Your invoice generated that day will reflect the cost of the PC Board as well as the $100 core credit ($75 without the mounting bracket).
• Before shipping a non-operational PC Board to RPI, please read Control PC Boards and Troubleshooting Guide to Protect Your Replacement PC Board, page 1.
• To be eligible for a Core Credit: 1) The PC Board must be in reasonable condition without burn holes; and 2) The Mounting Bracket must also be shipped to RPI with the non-operational PC Board.

Also Available:

• Control PC Board (Part #MIB129)
• Fuse (F1) (1/4A, 250V) (Part #RPF059)
• Fuse (F2) (15A,250V) (Part #RPF281)
• Pressure Tube Kit (Part #MIK117)
• Water Level Sensor Harness (Part #MIH145)
• Temperature Sensor (Part #MIS121)
• Heater (Part #MIH048) and (Part #MIH049)
• Main Harness (Part #MIH238)
• Jumper Wire (Part #MIJ328)
• Heater Wire Harness (Part #MIH327)

Fits: Chassis